출처 http://theonlinephotographer.typepad.com/the_online_photographer/2013/03/kingston-technology-to-the-rescue.html


Most camera manufacturers follow the "Design rule for Camera File System" standard which specifies both directory 

and file structure for recording data to your device. Typically, when you format a card in your camera (or other device), 

it will follow this specification so that the file structure produced is exactly what the manufacturer expects. If you've seen 

a "DCIM" folder on your memory card before, this is the specification in action. Kingston always recommends 

that photographers format their memory cards within the device they intend to use the card in. This helps to ensure 

that the card is formatted correctly, will communicate with the device in the manner in which the manufacturer intended 

and helps prevent data corruption.


As a general rule, there are two options for formatting. A "format" is sufficient to clean the File Allocation Table (FAT) 

and refresh the card for subsequent use. A "low-level" format (not present on all devices) is designed to prevent users 

from recovering data in instances where one would want to dispose of the memory card. 

This approach could take a bit longer depending on the capacity of the card.

대부분의 카메라 제조업체는 여러분의 장치에 데이터를 기록하기 위한 디렉토리 및 파일 구조를 명시한  "카메라 파일 시스템 디자인 룰"을 따

르고 있습니다.통상 카메라(또는 다른 장치)에서 카드를 포맷시 이렇게 명시된대로 따름으로써 생성된 파일 구조는 제조업체가 의도한대로

딱 들어맞습니다.이전에 여러분의 메모리 카드에서 "DCIM"이라는 폴더를 본 적이 있다면 이것이 작동중인 그 명시 규격입니다.킹스턴은 항상

사진가들이 메모리 카드가 사용되는 장치 내에서 카드를 포맷할 것을 권장합니다.이렇게 하면 카드가 정확하게 포맷되고 제조업체가 의도한대로

장치와 소통되며 데이터 오염이 방지됩니다.


일반적으로 포맷하는 방법에는 두 가지가 있습니다."포맷"만으로도 파일 할당 테이블(FAT)을 비우고 후속 사용을 위해 카드를 리프래시하기 충분합니다.

"로우 레벨"포맷은 (일부 장치에는 없음) 메모리 카드를 폐기할 때 다른 사람이 데이터를 복구하는 것을 방지하기 위한 것입니다.

이 방법은 카드 용량에 따라 시간이 더 걸립니다.



As a general best practice, Kingston recommends the user format the card.


When you select "erase," the data (e.g. an image) is still there. What is being deleted is the location of the photo 

stored in the File Allocation Table. "Erase All" deletes every single location in the File Allocation Table.

Although the information in the FAT table has been erased, there can still be "residue" from the file. 

What can happen is the next time something is written in that spot, the controller on the card may decide to skip 

that spot or write a partial piece of data to it, while the rest of the data is stored elsewhere. This is called fragmentation. 

Similar to a hard-disk drive, fragmentation can cause performance issues. A "reformat" deletes the entire table 

and then creates a new one for the next use, meaning that as new information is written to the card, 

it is done sequentially in the FAT table.

킹스턴이 추천하는 일반적으로 가장 좋은 방법은 카드를 포맷하는 것입니다.

"삭제"를 선택하면 "데이터(예를 들면,이미지)는 그대로 존재합니다.정작 삭제된 것은 FAT에 저장된 사진의 위치입니다.

"전부 삭제"는 FAT의 모든 단일 위치를 지우며 파일의 "찌꺼기"가 여전히 남습니다.다음 번에 그 자리에 뭔가 쓰여지면

카드의 컨트롤러는 그 자리를 피하거나 거기에 데이터의 일부를 기록하고 나머지는 다른 곳에 저장하는 일이 벌어집니다.

이것이 조각화입니다.하드 디스크 드라이브에서와 유사하게 조각화는 성능 문제를 야기할 수 있습니다."포맷"을 함으로써 

테이블이 전부 지워지고 후속 사용을 위한 새로운 테이블을 만들어집니다.즉 새로운 정보가 카드에 기록되면서 FAT에서

연속적으로 이루어집니다.


간단 요약:카메라에 사용하는 메모리 카드는 반드시 사용할 카메라에서 포맷해라.

            "삭제"는 찌꺼기가 남아서 조각을 만들 수 있으니 데이터를 지울려면 무조건 포맷해라.

'악세사리 Accessory > 기타 Etc' 카테고리의 다른 글

Nissin Power Pack PS 8  (0) 2013.08.02
About Sigma USB DOCK  (0) 2013.06.08
SanDisk® SD™ WORM card - SDSDWRM  (0) 2013.03.15
다양한 휴대용 LED (스탠드) 제품-참고용  (0) 2013.01.02
스파이더체커/SpyderCheckr  (0) 2012.08.23
Posted by nepo
,